This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TL16C752C:寄存器中断设置

Guru**** 2528170 points
Other Parts Discussed in Thread: TL16C752C

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/616991/tl16c752c-register-interrupt-setting

部件号:TL16C752C

您好,

当TL16C752C芯片将数据接收 到缓冲区时,
如何设置以启用INT-A (或INT-B),
在中断处理后,我应该如何清除它?
谢谢!
TS
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好TS

    您必须启用MCR寄存器的第3位,中断在寄存器IER处。 您可以对此中断使用不同的选项。
    如果要清除中断,您可以禁用相同的MCR位或更改中断状态。

    此致
    弗朗西斯科