请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPD4E004 我想知道以下有关 TPD4E004DRYR 的信息
回流循环的最大数量是多少?
回流焊条件是否符合 J-STD-020?
什么是电极镀层材料?
故障率(FIT)是多少?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我想知道以下有关 TPD4E004DRYR 的信息
回流循环的最大数量是多少?
回流焊条件是否符合 J-STD-020?
什么是电极镀层材料?
故障率(FIT)是多少?
您好、Yoshitsugu、
该器件 根据 J-STD-020进行分类、 可承受3个回流焊周期。
可在以下网址访问电镀信息: https://www.ti.com/materialcontent/en/report?pcid=261086&opn=TPD4E004DRYR
可在以下网站访问 FIT 信息: https://www.ti.com/quality/docs/estimator.tsp?OPN=TPD4E004DRYR&CPN=&partNumber=tpd4e004dryr#resultstable
此致、
Matt Smith