请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/992050/max3243-max3243
器件型号:MAX3243你(们)好
请建议如何处理未使用的 ROUTx 和 DINx 引脚? 只需保持悬空/断开?
谢谢你
Steven
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/992050/max3243-max3243
器件型号:MAX3243你(们)好
请建议如何处理未使用的 ROUTx 和 DINx 引脚? 只需保持悬空/断开?
谢谢你
Steven