This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TUSB1210:背板用法

Guru**** 2927270 points

Other Parts Discussed in Thread: TUSB1210

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/879378/tusb1210-backplane-usage

器件型号:TUSB1210

您好!

我代表我的客户发布。

"我们希望将 TUSB1210用作外设、并希望将 USB 信号发送到背板、并将 USB 连接器放置在系统的另一个部分。  在这种情况下、是否需要连接 VBUS 引脚?  我只是尝试发送差分信号。"

请告诉我。

谢谢、

Tom

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    如果用作 USB 通信、则需要连接 Vbus。 您能 绘制系统图吗?