This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN75DP139:需要结温值

Guru**** 2680595 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/903596/sn75dp139-need-junction-temperature-value

器件型号:SN75DP139

我们在设计中使用以下器件、并正在运行产品的热仿真。 您能否帮助共享以下器件的最大允许结温值(Qj):

 

  1. TCA6416ARTWR
  2. SN75DP139RSB

 

我们已经开始热仿真、因此您对此立即做出响应将不胜感激。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!  

    DP139的最高结温为125C。  

    谢谢

    David