This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN65DSI86:DSI86 IRQ 问题

Guru**** 2812305 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/799074/sn65dsi86-dsi86-irq-question

器件型号:SN65DSI86

你(们)好

      DIS86 IRQ 引脚是否需要 外部电阻上拉? IRQ 引脚输出 电压如何?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    Kerr

    IRQ 上不需要上拉、这是一个1.8V 信号。

    谢谢
    David
  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你(们)好、David

         感谢您的大力支持。