This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DS80PCI102:支持低功耗链路状态

Guru**** 2511985 points
Other Parts Discussed in Thread: DS80PCI102

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/839338/ds80pci102-low-power-link-states-support

器件型号:DS80PCI102

我们在 其中一个 PCIe 链路中使用 DS80PCI102。

链路在活动状态下工作正常。 但是、我们在低功耗状态方面存在问题。

在链路训练期间、链路未进入低功耗状态(L1SS 即 L1.1和 L1.2)

 我们想知道 DS80PCI102是否支持低功耗状态。

谢谢

Ranga

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你(们)好

    DS80PCI102不主动监控 PCIe 协议、因此它不会单独根据数据进入低功耗模式。  如果允许 DS80PCI102保持受电状态 、则不应阻止系统在协议感知组件之间实现低功耗 PCIe 状态。

    此致、

    Lee