This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN75LVCP601:露点 NC 配置

Guru**** 2553260 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/828616/sn75lvcp601-dew-nc-configuration

器件型号:SN75LVCP601

大家好、团队、

不连接到露针是否正常? sllu211上有 NC 配置。 根据我的理解、有内部上拉露、因此没有问题。

此致、
Satoshi Yone

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好 Satoshi、

    露引脚设计为在默认情况下弱拉高、如 EVM 信息所示。  如果露点=长脉冲是所需的响应、我建议拉高。

    此致、

    Lee