请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TPS65988 大家好、
是否可以知道为什么数据表中没有指定 PD 配置为 I2C 主设备时的 I2C 上升时间? 谢谢!
此致、
Leroy Song
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好、
是否可以知道为什么数据表中没有指定 PD 配置为 I2C 主设备时的 I2C 上升时间? 谢谢!
此致、
Leroy Song
您好、Leroy、
您可以参考 TPS65988数据表中的"6.15 I2C 要求和特性"部分 、其中显示了标准(100kHz)和快速(400kHz)模式下的所有 I2C 时序特性。
谢谢、
哈里