This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] AM26LV32E:是否将中心焊盘连接到 GND 或保持悬空?

Guru**** 2526700 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/706004/am26lv32e-center-pad-connect-to-gnd-or-leave-floating

器件型号:AM26LV32E

在查看 AM26LV32EIRGYR (VQFN 封装)的数据表时、我看不到是否建议将中心散热器连接到 GND 或保持悬空。  你那有什么信息吗?

谢谢

Viktorija

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    您好 Viktorija、

    散热焊盘应连接到此器件的 GND 平面。

    此致、
    Eric