请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:SN65LVDS179 您好 TI 团队。
SN65LVDS179D 在我的模块多次插入/提取操作后会消失。 SN65LVDS 连接到 MCU 串行接口、而在另一侧连接到 FPGA LVDS 线路。附加原理图。您能否为我提供有关 IC 的说明和参考设计?
感谢您的响应
AZ GaN
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好 TI 团队。
SN65LVDS179D 在我的模块多次插入/提取操作后会消失。 SN65LVDS 连接到 MCU 串行接口、而在另一侧连接到 FPGA LVDS 线路。附加原理图。您能否为我提供有关 IC 的说明和参考设计?
感谢您的响应
AZ GaN
您好、Az、
它可能是电气过载。 我们没有此器件的参考设计、但您可以参考此应用手册 :https://www.ti.com/lit/an/slla107/slla107.pdf
此致、
I.K.