This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] PCA9534:多主控模式

Guru**** 2511415 points
Other Parts Discussed in Thread: PCA9534

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1194645/pca9534-multi-master-mode

器件型号:PCA9534

各位专家:

我们需要您的帮助。  

PCA9534是否可用于在多主控模式下运行的总线上?  请参阅以下说明:

https://www.i2c-bus.org/multimaster/

 提前感谢您的支持。

此致、

Jonathan

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    是的。

    只有主器件必须具有多主器件功能、即任何失去仲裁的主器件都必须立即中止。 从设备只能看到成功的事务;它们没有任何变化。