This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] DS320PR1601RSCEVM:第5.0代转接驱动器

Guru**** 2387080 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1301044/ds320pr1601rscevm-gen-5-0-redriver

器件型号:DS320PR1601RSCEVM

您好!

要启用 Rx 检测状态机、我们应切换 PD 引脚。

如果我们这样做,转接驱动器将在哪种设备功能模式下工作?

(有源 PCIe、有源缓冲器、待机)

谢谢。此致、

Shekha Shoukath

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    PD 取消置位后、将启动 RX 检测过程。 在该模式下、输入和输出阻抗均为高电平。 因此器件在再次检测到 RX 之前处于待机模式。

    此致、Nasser