This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74LVC1G17:在为 Vcc 供电之前驱动输入

Guru**** 2393725 points
Other Parts Discussed in Thread: SN74LVC1G17

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1123798/sn74lvc1g17-driving-input-before-powering-vcc

器件型号:SN74LVC1G17

大家好、

 当未提供 VCC (VCC = 0V)时、从外部将 SN74LVC1G17的输入驱动至3.3V 是否安全?  当 Vcc = 0时、输入电压大于0时、我们的客户担心器件会受到永久性损坏、或者如果输入电压被驱动为"高电平"、然后施加 Vcc、则可能会发生闩锁。

在这种情况下、在施加 VCC 之前输入被驱动为高电平、器件是否能够正常运行并在其规格范围内? 提前感谢!


此致、

Jejomar