请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1122268/lsf0108-vih-vil-threshold
器件型号:LSF0108大家好、
在进行3.3V 至1.8V 或1.8V 至3.3V 转换时、输入 VIH 和 VIL 阈值是多少? 谢谢!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1122268/lsf0108-vih-vil-threshold
器件型号:LSF0108大家好、
在进行3.3V 至1.8V 或1.8V 至3.3V 转换时、输入 VIH 和 VIL 阈值是多少? 谢谢!
没有阈值。 对于低于 Vref_A 的电压、LSF 用作模拟开关。 对于 Vref_A 或更高的电压、开关断开、电压由上拉电阻器决定。