This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/logic-group/logic/f/logic-forum/982610/sn74lv165a-default-condition-of-pin-7
大家好、
对于 SN74LV165A (TSSOT)：当这些引脚未连接时、引脚7的默认高阻抗条件是什么？
此致、
Wendy
两个输出引脚始终驱动最后一次翻转的当前状态。 但未使用的输出只能保持开路。
