This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74LVC125A:缓冲器的输出驱动级电路

Guru**** 2513185 points
Other Parts Discussed in Thread: SN74LVC125A

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/766687/sn74lvc125a-output-drive-stage-circuit-of-the-buffer

器件型号:SN74LVC125A

团队、

缓冲器的输出驱动级电路是什么? 是漏极开路、源极开路、推挽还是其他问题?

谢谢

Viktorija

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    SN74LVC125A 器件具有具有三态输出的独立线路驱动器。 当相关的输出使能(OE)输入为高电平时、每个输出被禁用。

    "三态"意味着它可以驱动低电平和高电平状态、因此它是推挽式。