This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430G2312:分压电阻器(COMP 所需的流入电流)

Guru**** 2387080 points
Other Parts Discussed in Thread: MSP430G2312
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1033993/msp430g2312-voltage-divider-resistor-inflow-current-required-for-comp

器件型号:MSP430G2312


msp430g2312に関する確認 μ A

外设_COMP
で私は電圧を監視したいと思います 動作は約5Vの μ A
電源のためのメガオーダーの抵抗電圧分圧器で不安定です。μ A

また、μ A
データシートのCOMPカラム μ A
I (DD)= 45μA μ A
部分圧が10KΩ程度でないと難しいですか?

電圧分割抵抗の適切な桁を教えてください。μ A