This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430F5436A:看门狗定时器清零指令之间的间隔限制

Guru**** 2524550 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/979567/msp430f5436a-restrictions-on-the-interval-between-watchdog-timer-clear-instructions

器件型号:MSP430F5436A

您好!

看门狗定时器清零指令之间的间隔是否有任何限制?

我想 μs 看门狗计时器的短清零周期为几 μ s、因此我想确认 MCU 的规格没有问题。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你(们)好,Koki

    通常 、看门狗计时器清零指令可 在主循环中执行。 它取决于 主循环圆。 除了 主循环圆、我看不到任何其他限制。 谢谢!