This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP432E401Y:SysConfig QSPI

Guru**** 670150 points
Other Parts Discussed in Thread: SYSCONFIG, TIDM-TM4C129SDRAMNVM
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/973274/msp432e401y-sysconfig-qspi

器件型号:MSP432E401Y
主题中讨论的其他器件:SysConfigTIDM-TM4C129SDRAMNVM

您好!

SysConfig 是否可用于创建 QSPI 接口?  如果没有、我可以参考一个示例?

此致、

-Mike

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    尊敬的 Mike:

    感谢您将问题发布到 E2E。 我找不到任何使用 SysConfig 的 QSPI (似乎与 Quad-SPI、Quad-SSI 或 QSSI 同义)示例、但我确实找到了一个用于演示 MSP432E401QSSI 接口的 DriverLib 代码示例。 它与 TIDM-TM4C129SDRAMNVM 参考设计类似。

    此致、

    James