This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430G2230:MSP430G2230

Guru**** 2382030 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/681573/msp430g2230-msp430g2230

器件型号:MSP430G2230

引脚6、7 (RST/NMI/SBWTDIO 和 TEST/SBWTCK)我是否可以使用这些引脚作为 通用输入?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
    测试引脚不能从器件侧使用。 它用作具有有源 SBW 的输入(从 FET 到器件的时钟信号)。

    复位引脚可用作器件侧的输入、作为 NMI。 但在此期间、FET 将无法与器件通信。 它将无法调用 BSL。