This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] MSP430F4618:从 MSP430F449移植串行通信

Guru**** 671890 points
Other Parts Discussed in Thread: MSP430F449, MSP430F4618
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1263970/msp430f4618-porting-serial-comms-from-msp430f449

器件型号:MSP430F4618
主题中讨论的其他器件:MSP430F449

大家好!

 MSP430F449具有 UART0和 UART1。
例如、其 CTL 寄存器可用作符号  U0CTL 和 U1CTL  

MSP430F4618只定义了 U1CTL、但并未定义 U0CTL。
我能不能得出结论、MSP430F4618只有 UART1。
或者 UART0的功能是否以其他方式可用?

非常感谢。

大卫