您好!
根据芯片上配置的无线电参数、我想定义灵敏度和解码错误之间的最佳折衷。
如何为 CC2500定义无线电配置的 BER?
谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好 Gregoire、
数据包错误率(PER)与位错误率(BER)相关(PER = 1 (1-BER) packet_length)。 您可以使用 示例库、 SimpliciTI或 Smart RF Studio 测试来进行评估。 以下是一些有关如何监控 BER 的 E2E 主题:
https://e2e.ti.com/f/1/t/3786113
https://e2e.ti.com/f/1/t/3641710
https://e2e.ti.com/f/1/t/3804721
您可以使用 PER 测试来评估修改 MDMCFG2.DEM_DCFILT_OFF 和 TEST1/2寄存器(用于灵敏度级别)是否会改善您的系统。
此致、
Ryan
您好、Ryan、
您的链接 https://e2e.ti.com/f/1/t/3786113。。。不起作用
如果我了解您的方法是试验性的、那么在理论上无法定义 BER?
此致
很抱歉、链接断开。 在这里、它们再次出现(并在另一个 E2E 响应中更正):
https://e2e.ti.com/f/1/t/1024299
https://e2e.ti.com/f/1/t/984852
https://e2e.ti.com/f/1/t/1029025
位错误率必须被测量、不能只使用灵敏度参数进行定标。 数据表中提供了灵敏度水平为1%的射频接收结果。
此致、
Ryan