您好!
我正在尝试刷写 DCA1000EVM 板上的 FPGA 位。 然而、Lattice Diamond 编程器无法检测到该板。 请参见附图。
我已经注意到,其他人提出了这个问题如下,但 TMDXEVM3358-SK_FTDI_EEPROM_Programming_v1.1.pdf 已被删除。
DCA1000EVM:DCA1000EVM Lattice Programmer 无法检测-传感器论坛-传感器- TI E2E 支持论坛
您能帮助我吗?
谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好!
我正在尝试刷写 DCA1000EVM 板上的 FPGA 位。 然而、Lattice Diamond 编程器无法检测到该板。 请参见附图。
我已经注意到,其他人提出了这个问题如下,但 TMDXEVM3358-SK_FTDI_EEPROM_Programming_v1.1.pdf 已被删除。
DCA1000EVM:DCA1000EVM Lattice Programmer 无法检测-传感器论坛-传感器- TI E2E 支持论坛
您能帮助我吗?
谢谢
嗨、
复制来自其他 E2E 的响应: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1212912/dca1000evm-diamond-programr-error---failed-to-scan-board
您能否检查 FTDI 驱动程序是否已正确安装在您的 PC 中? 您能否确认您已成功完成 https://www.ti.com/lit/ug/spruij4a/spruij4a.pdf 中"FPGA Programming"一节中的所有步骤 ?
TMDXEVM3358-SK_FTDI_EEPROM_Programming_v1.1.pdf 可在以下位置找到: https://processors.wiki.ti.com/images/3/3e/TMDXEVM3358-SK_FTDI_EEPROM_Programming_v1.1.pdf 。 如果您无法访问、请告诉我。
此致、
Swati.