This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TIDA-00699:TIDA-00699 5.5 EMI 滤波器仿真

Guru**** 666710 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/956115/tida-00699-tida-00699-5-5-emi-filter-simulation

器件型号:TIDA-00699

大家好、

我对5.5 EMI 滤波器仿真有几个问题、

  1. 我们是否在仿真中考虑过 LISN?
  2. 为什么我们将傅里叶基频设置 为117.5kHz?
  3. 电源的电阻是多少?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你好

    这是基于 EVM 的较旧设计。 遗憾的是、我们没有该仿真的源文件。 我建议联系这些产品表以了解更多信息。

    Luis