This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/790735/tida-01022-replace-c16-with-0ohm-resister
是的、C16为0E。 关断电容 C11+C16 = 2.4pF
我能否短接迹线而不使用0欧姆分辨率？
