This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] CC2531:CC2531作为射频模块的基本检查

Guru**** 2933120 points

Other Parts Discussed in Thread: CC2531, Z-STACK

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread/f/zigbee-thread-forum/609910/cc2531-basic-check-of-cc2531-as-rf-module

器件型号:CC2531
Thread 中讨论的其他器件: Z-stack

您好!

我是 CC2531的新手。 我已使用调试器刷写了 rf_demme.hex。 使用超级终端、我希望通过插入 Windows 10的 CC2531发送和接收数据。

我找不到适用于 Windows 10的驱动程序文件、但在器件管理器中、它被列为具有 COM 端口的 USB 串行器件。 它未如器件经理文档中所示。

我看到以下文章 "CC2531示例应用"... 安装 z-stack-3.0后、我找不到任何串行应用程序

https://e2e.ti.com/support/wireless_connectivity/zigbee_6lowpan_802-15-4_mac/f/158/t/139557#

建议我 如何继续使用 CC2531 ...

提前感谢。

 

此致、

Johvin