SVPWM F240程序移植至F280x求指导

请到TI官网搜索spru160c，参考汇编语音指令C24x DSP Controllers Reference Guide chapter 7.
www.ti.com.cn/.../spru160c.pdf

汇编语言我们没有问题，问题是不很明白F2407A与F280x在SVPWM输出相关功能部件的使用区别？？

帮忙看看，这个奇怪的问题，谢谢：e2echina.ti.com/.../156329

OK，我看看，另外问一下：ControlSuite与C2000Ware是什么关系？

他们都包含c2000器件的相关例程、库以及文档，区别是c2000ware对controlsuite中的一些例程有做修正，而F28004x的例程则需要使用c2000ware。

看了一下 C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVPM_Enhanced_Sensorless_2803x 和 C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVPM_Sensored_Servo 的程序，也看了里面附的pdf文档，好像介绍的比较粗略，有没有更详细的文档介绍SVPWM输出的呢？

1220.spra524.pdf

5460.spra284a.pdf

motorware软件用到的SVPWM也不一样，

The SVM technique used with InstaSPIN is discussed in the following reference:

Advanced Electric Drives, Analysis, Control and Modeling using Simulink, by Ned Mohan, MNPERE Press, Minneapolis, MN 55414, 2001, ISBN# 0-9715292-0-5

This technique was selected because it seamlessly transitions into the overmodulation region of operation by simply increasing the amplitude of the voltage variables from the Inverse Park Transform.  A natural clipping effect occurs which causes the waveforms to change from sinusoidal to trapezoidal.

You can replace the SVM module with a more conventional technique if you desire.  But you must then manage the overmodulation yourself.

只能帮你到这里了。

感谢！我先看看，估计很难看得懂，呵呵