TMS320F280260 编译没有问题，在进行Emulator时，提示C28xx: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.

我还有几个疑问：

  1.  调试器的内存映射在哪里查看？

  2. 下面是我的CMD文件的全部内容，请帮我看一下那一块有问题，谢谢！谢谢！

MEMORY
{
PAGE 0 :
/* For this example, L0 is split between PAGE 0 and PAGE 1 */
/* BEGIN is used for the "boot to SARAM" bootloader mode */

BEGIN : origin = 0x000000, length = 0x000002
RAMM0 : origin = 0x000050, length = 0x0003B0
PRAML0 : origin = 0x008000, length = 0x000400
RESET : origin = 0x3FFFC0, length = 0x000002

IQTABLES : origin = 0x3FE000, length = 0x000B50 /* IQ Math Tables in Boot ROM */
IQTABLES2 : origin = 0x3FEB50, length = 0x00008C /* IQ Math Tables in Boot ROM */
IQTABLES3 : origin = 0x3FEBDC, length = 0x0000AA /* IQ Math Tables in Boot ROM */

BOOTROM : origin = 0x3FF27C, length = 0x000D44

PAGE 1 :

/* For this example, L0 is split between PAGE 0 and PAGE 1 */
BOOT_RSVD : origin = 0x000002, length = 0x00004E /* Part of M0, BOOT rom will use this for stack */
RAMM1 : origin = 0x000400, length = 0x000400 /* on-chip RAM block M1 */
DRAML0 : origin = 0x008200, length = 0x000200
}

SECTIONS
{
/* Setup for "boot to SARAM" mode:
The codestart section (found in DSP28_CodeStartBranch.asm)
re-directs execution to the start of user code. */
codestart : > BEGIN, PAGE = 0
ramfuncs : > RAMM0 PAGE = 0
.text : > PRAML0, PAGE = 0
.cinit : > RAMM0, PAGE = 0
.pinit : > RAMM0, PAGE = 0
.switch : > RAMM0, PAGE = 0
.reset : > RESET, PAGE = 0, TYPE = DSECT /* not used, */

.stack : > RAMM1, PAGE = 1
.ebss : > DRAML0, PAGE = 1
.econst : > DRAML0, PAGE = 1
.esysmem : > RAMM1, PAGE = 1

IQmath : > PRAML0, PAGE = 0
IQmathTables : > IQTABLES, PAGE = 0, TYPE = NOLOAD

}