This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
想配置eqep的脉冲计数只在初始化时清零一次，后面遇到Z也不清零，如何配置
为了说明一点、您是否想知道如何将 eQEP 的位置计数器配置为在初始化期间仅清除一次？ 可在初始化期间在软件中初始化位置计数器。
