您好,
我在回原点设计中使用到读取到Z信号状态时作为原点,想请问如何读取Z信号状态
感谢回复
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好
确保 Z 信号(通常是一个开关或传感器输出)正确连接到 TMS320F28388D 的 GPIO 引脚。选择一个适合的 GPIO 引脚来读取 Z 信号。另外在代码中,您需要配置所选的 GPIO 引脚为输入模式。,可以参考TI的C2000 ware。