This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
用的4线制调试接口 引脚排列 3.3V TEST /RST GND
所用仿真器MSP-FET430UIF ，并自己做了转接头 IAR for MSP430 V5.30版本，程序编译无错误，但点击下载，提示错误。不知道应如何处理
1.RST的滤波电容要小于或者等于2.2nF，太大会造成仿真器无法正常控制MCU。
2.楼主使用的是SBW调试模式，请务必按照如下线序进行MCU与仿真器的连接
MSP-FET430UIF MSP430 MCU
TDO RST
TCK 330 Ohm + TEST
VCC VCC
GND GND
