低功耗模式为LPM3
接着仿真器的话,直流稳压可调电源上显示的电流为3mA
不接仿真器的话,显示的电流为15mA
请问仿真器的3.3V是否对此有影响?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
低功耗模式为LPM3
接着仿真器的话,直流稳压可调电源上显示的电流为3mA
不接仿真器的话,显示的电流为15mA
请问仿真器的3.3V是否对此有影响?
请问仿真器的3.3V是否对此有影响?
在连接仿真器的情况下是不会进入低功耗LPM3模式的
不接仿真器的话,显示的电流为15mA
您的程序是怎样的?是否有使用低功耗的例程来测试?
如 https://dev.ti.com/tirex/explore/node?node=AAghnkenXMnlHXVaxwkY2A__IOGqZri__LATEST