我在使用DRV10983EVM GUI 时,准备通过eeWrite将配置写入寄存器,但是一直弹出如下提示
如果这里指的22V电压是EVM上P1处的Vcc,我能确定给到了超过22V的电压。
请问应该如何排除这个困难,将电机配置通过eeWrite写入寄存器。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我在使用DRV10983EVM GUI 时,准备通过eeWrite将配置写入寄存器,但是一直弹出如下提示
如果这里指的22V电压是EVM上P1处的Vcc,我能确定给到了超过22V的电压。
请问应该如何排除这个困难,将电机配置通过eeWrite写入寄存器。