If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我们确定用BQ25713B了，其中有一个功能请教下： Pass Through Mode (PTM) 开启和关闭的条件是如下其中之一还是同时满足？
Device will be transition from normal Buck-Boost operation to PTM operation by:
• Set REG0x32[7] = 0, to disable the EN_EXITILIM.
• Set REG0x31[0] = 1.
• Set REG0x30[2] = 1.
• Ground ILIM_HIZ pin.
Device will transition out of PTM mode with host control by:
• Set REG0x30[2] = 0.
• Pull ILIM_HIZ pin to high.
• Device exits PTM to buck-boost operation if tripping VinDPM.
• Device exits PTM to buck-boost operation under fault conditions (for examples ACOC, TSHUT, BATOC, BATOV).
