• 状态 Resolved
  • 已锁定 已锁定
  • 回复 3 回复
  • 订户 55 订户
  • 视图 2048 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD3138EVM-026例程调试失败

scarecrow
Prodigy 170 points
Other Parts Discussed in Thread: UCD3138064, UCD3138

例程是从官网上下载的（PWR026_PFC)，在使用ccs工具进行调试时遇到了很多问题，始终未能找出原因，更换版本也是同样的问题，是哪里设置不对吗？请教各位前辈。以下为错误提示：

warning #10366-D: automatic library build: using library "E:\win
   10\ccs9.1.0\ccs\tools\compiler\ti-cgt-arm_5.2.5\lib\rtsv4_T_be_tiarm9.lib"
   for the first time, so it must be built.  This may take a few minutes.
'e:/win' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
>> ERROR: mklib: gmake error during rtsv4_T_be_tiarm9.lib build
warning #10207-D: automatic RTS selection:  resolving index library "libc.a" to
   "rtsv4_T_be_tiarm9.lib", but "rtsv4_T_be_tiarm9.lib" was not found

error #10234-D: unresolved symbols remain
error #10010: errors encountered during linking; "PWR026_PFC_UCD3138064.out"
   not built
 
>> Compilation failure
makefile:175: recipe for target 'PWR026_PFC_UCD3138064.out' failed
gmake[1]: *** [PWR026_PFC_UCD3138064.out] Error 1
gmake[1]: Target 'main-build' not remade because of errors.
makefile:167: recipe for target 'all' failed
gmake: *** [all] Error 2
**** Build Finished ****
有劳各位

  • 0
    TI__Guru**** 308311 points
    Hi
    建议你重新安装CCS， 在directory win10.
  • 0 回复 Johnsin Tao
    Prodigy 170 points
    您好，错误依然存在：
    warning #10366-D: automatic library build: using library "E:\win
    10\ccsv6\tools\compiler\ti-cgt-arm_5.2.5\lib\rtsv4_T_be_tiarm9.lib" for the
    first time, so it must be built. This may take a few minutes.
    'e:/win' 不是内部或外部命令，也不是可运行的程序
    或批处理文件。
    >> ERROR: mklib: gmake error during rtsv4_T_be_tiarm9.lib build
    warning #10207-D: automatic RTS selection: resolving index library "libc.a" to
    "rtsv4_T_be_tiarm9.lib", but "rtsv4_T_be_tiarm9.lib" was not found

    undefined first referenced
    symbol in file
    --------- ----------------
    C$MEMCPY ./pmbus_topology.obj
    I$DIV ./init_dpwms.obj

    U$DIV ./init_dpwms.obj
    >> Compilation failure
    makefile:170: recipe for target 'PWR026_PFC_UCD3138.out' failed
    U_DIV ./standard_interrupt.obj

    error #10234-D: unresolved symbols remain
    error #10010: errors encountered during linking; "PWR026_PFC_UCD3138.out" not
    built
    gmake: *** [PWR026_PFC_UCD3138.out] Error 1
    gmake: Target 'all' not remade because of errors.

    **** Build Finished ****


    rtsv4_T_be_tiarm9.lib这个库如何构建呢？
  • 0 回复 Johnsin Tao
    Prodigy 170 points
    您好，问题已经解决，是路径的问题，不能带有空格，感谢。