This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
通过EV24700，bq27200与bqstudio能够正常通信，寄存器信息也能读出来
但我在data memory设置参数时，比如设置design capacity,将默认的3000改为5000，然后点击write all，出现了下面这个提示，这个是啥意思？
您好，请参考下面文档1.1 Initial Last Measured Discharge配置design capacity
www.ti.com.cn/.../slua338.pdf
