This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在charge termination里设置的taper current 是500mA，cell taper voltage是0.1V
实际测试的时候，电压达到了，但是电流没达到（约1A）时，SOC变为了100%，这是为什么？
您好，CHEM ID是否配置和做了完整学习。
完整学习了，我想了解的是，bq34z100-G1的满电判定除了taper current和cell taper voltage是否还有别的条件？
您好，请参考TRM 3.7 Charging and Charge Termination Indication
