This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
最近在燒錄TPS53819ARGTR，想請問一下
燒錄後如何使用Fusion Digital Power Designer確認燒錄Pass的IC是否燒錄的檔案一致
例如：TPS53688RSBR有NVM_CHECKSUM能確認CHECKSUM是否正確
TPS53819ARGTR是否也有相同的Configuration能進行確認
以上麻煩再幫確認回覆，謝謝
Hi
应该是不具备这个功能的。一般只能通过输出电压来确认，对于软件来说只有将配置保存到NVM就可以了。
