请问关于TPS40210-HT CFP-10 封装,引脚长度达到8mm,设计PCB footprint时,是否也必须按照8mm厂的焊盘设计呢,还是可以将芯片引脚剪短,从而使用普通的SOIC-10封装焊盘即可
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
请问关于TPS40210-HT CFP-10 封装,引脚长度达到8mm,设计PCB footprint时,是否也必须按照8mm厂的焊盘设计呢,还是可以将芯片引脚剪短,从而使用普通的SOIC-10封装焊盘即可