If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1， This parameter is not characterized, the other information regarding rise times in the datasheet should be used for this kind of calculation. Page 16 of the datasheet has the information.
2，非常抱歉没有查到相关信息。
3，这款芯片的TRM没有介绍 open-wire detection，
断线检测功能介绍如下：
When Cell Open Wire protection is enabled, the device will periodically enable a small current source from each cell to test the discharge rate of each cell. If a cell is attached, the voltage should remain relatively constant. However, if a cell line is broken, the only charge is from a capacitor which should drop its voltage quickly when the current source is enabled, triggering an undervoltage protection. Likewise, the voltage of the cell above will double, also triggering an overvoltage fault.
