This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI team，
BQ25601在充电CV阶段电流会有一个较大的跳变（从260mA会跳变到220mA），请问这是什么原因造成？如下图
您好，请将寄存器参数发过来看一下。
Hi Star，
这是充电过程的寄存器[BQ] REG[0] = 0x1d[BQ] REG[0x1] = 0x1a[BQ] REG[0x2] = 0xaa[BQ] REG[0x3] = 0x2[BQ] REG[0x4] = 0x88[BQ] REG[0x5] = 0x8f[BQ] REG[0x6] = 0xa6[BQ] REG[0x7] = 0x4c[BQ] REG[0x8] = 0x74[BQ] REG[0x9] = 0[BQ] REG[0xa] = 0xc0[BQ] REG[0xb] = 0x11
您好，这个问题已经在E2E英文论坛发帖，暂时没有收到回复，请继续关注下面的帖子。
e2e.ti.com/.../bq25601-cv-current-issue
您好，REG0A=C0 indicates VINDPM which may limit charge current.
