基于15w放电曲线,先用7A恒流充放,曲线正常,再次充满后用15W放电,曲线异常。顺便问下:从理论上讲,恒流与恒功率这种切换会影响曲线吗?15W放(1).log
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
基于15w放电曲线,先用7A恒流充放,曲线正常,再次充满后用15W放电,曲线异常。顺便问下:从理论上讲,恒流与恒功率这种切换会影响曲线吗?15W放(1).log
您好,There's no RSOC jump here. The problem is that the gauge estimated Full charge capacity based on the previous discharged load (7A). In other words the gauge underestimated FCC. This is mainly because load select is set to 7 which uses Max Avg P.
Try changing load select to 06 and change user rate cW to -1500cW. See below
Gas Gauging | IT Cfg | User Rate-cW | -1500 | cW |