电路如图所示,其中输入电容和输出电容都是贴片陶瓷电容,在使用24V开关电源给电路板供电时有概率出现芯片损坏的情况,并且串联的24欧电阻也被烧坏,我目前还每找到原因,想请问TI的工程师哪些因素会造成这种情况出现,我又该如何避免
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
电路如图所示,其中输入电容和输出电容都是贴片陶瓷电容,在使用24V开关电源给电路板供电时有概率出现芯片损坏的情况,并且串联的24欧电阻也被烧坏,我目前还每找到原因,想请问TI的工程师哪些因素会造成这种情况出现,我又该如何避免