According to the datasheet, the time QON is held low(about 10 s ) to initiate system power reset.
How do i stop power reset for "tQON_RST"?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
According to the datasheet, the time QON is held low(about 10 s ) to initiate system power reset.
How do i stop power reset for "tQON_RST"?
Hi,
Please check the following link to see if it can helps:e2e.ti.com/.../faq-bq25620-how-does-qon-pin-function-work-and-what-is-required-hold-low-timing
Hi,
Please refer to 16 page of datasheet:https://www.ti.com/lit/ds/symlink/bq25622.pdf#page=16
If you don't want to exit from Ship Mode and don't want to initiate system power reset, can you consider pulling the QON low to within 0.55s?
I know this 16 page of datasheet.
I want to exit from Ship Mode but i don't want to initiate system power reset.
I care user pressing the power key(QON pin) for too long, so do you have any hardware implementation in power key(QON pin)?
Hi,
Yes, there is a brief introduction in the data sheet, but it is not exhaustive, you can go to our English E2E and ask the product line experts, maybe they know more details:e2e.ti.com/.../addpost