- 看门狗一旦开启,软件边便无法关闭它是么?
- 看门狗溢出复位会使368内部的各个模块全都一起复位吗?
- 368看门狗溢出复位的时候,能否向外面发出一个复位信号,以便使外围电路的其他芯片一起复位?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. 看门狗一旦开启,软件边便无法关闭它是么?
【Chris】下面的信息可以在timer user guide里面找到:
Once the watchdog timer is activated, it can be disabled only by a watchdog timeout event or by a hardware reset.
|
2. 看门狗溢出复位会使368内部的各个模块全都一起复位吗?
【Chris】下面的信息可以在ARM subsystem guide里面找到:
Table 106. Reset Types
Type Initiator Effect
Warm Reset RESETN pin low and TRSTN high (initiated by emulator). ARM Resets all modules including memory, except ARM emulation.
|
3. 368看门狗溢出复位的时候,能否向外面发出一个复位信号,以便使外围电路的其他芯片一起复位?
【Chris】抱歉,DM36x没有WDT信号输出引脚
|
请注意,你需要更新你的ubl为IPNC 5.1里面的最新ubl或者是下面帖子的ubl,以保证复位可以每次成功。
http://www.deyisupport.com/question_answer/dsp_arm/davinci_digital_media_processors/f/39/t/9002.aspx