This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
EVM Boot Mode Switches is "SD card boot",it seems like the EVM board does not work and no print in all uarts.
the tell is only four .
please give some tips about this
? ? 说：the tell is only four
请问这句话是什么意思？
我们用同样步骤点亮了SK-AM62A的开发板，板上有5颗灯亮着
请看一下电源是否是推荐的型号。Table 3-14. Recommended External Power Supplieshttps://www.ti.com.cn/cn/lit/ug/spruj51/spruj51.pdf另外，请尝试切换到uart boot mode，看串口是否有打印信息？
确定了下跳线和tiboot3.bin，和SK-AM62A不一样。
调整以后可以进到系统了
非常感谢分享解决办法！
请问具体是怎么解决的，我也碰到了同样的问题
.
