IWRL1432: CCS DEBUG 不能工作

bing xiao

Part Number: IWRL1432
Other Parts Discussed in Thread: UNIFLASH

IWRL1432 BOOST

下载例程中的程序uniflash 到开发板中可以正常运行;

但在ccs debug 运行时 CLI_MMWaveSensorStart() 不能正常运行

Error: FECSS RF Power ON/OFF failed
Error: mmWave Control Initialization failed [Error code -203227134] [errorLevel 2] [mmWaveErrorCode -3101] [subsysErrorCode 0]Exception: ../level_sensing.c, line 2552

1 个月前

0 Shine 1 个月前

TI__Guru**** 357097 points

请看是不是下面的原因引起的？

4.3 Debugging with MMWAVE_L_SDK

The code built for the xWRLx432 devices automatically runs with low power modes enabled. The low power modes do not allow for stepping through the code or setting breakpoints. To use the full debug capabilities of CCS with xWRLx432 code set gDebugTargetCode = 1 in motion_detect.c.

https://dev.ti.com/tirex/explore/node?a=1AslXXD__1.20.00.11&node=A__AKZl2I1OiS5ssBNGpidsCQ__radar_toolbox__1AslXXD__1.20.00.11&placeholder=true

传感器

传感器论坛

IWRL1432: CCS DEBUG 不能工作

4.3 Debugging with MMWAVE_L_SDK