This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc2540 透传接收数据最大长度设置问题



 配置最大长度SIMPLEPROFILE_CHARX_LEN时理论应该能设置到20,可我只有设置在19以下时才能正常启动,否则不能正常运行。请问可能是哪个环节出现了问题。导致不能设置到最大传输长度。