CC1352P7: 用CCS烧录工具，CC1352P芯片在烧录软件时， p7的芯片一烧录就会出现烧芯片的问题，请帮忙分析以下可能造成这个问题的原因是什么？

以下为烧录软件时的报错。

• • [Start: Texas Instruments XDS2xx USB Debug Probe_0]
    
    Execute the command:
    
    %ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity
    
    [Result]
    
    
    -----[Print the board config pathname(s)]------------------------------------
    
    C:\Users\mulintao\AppData\Local\TEXASI~1\
    CCS\ccs1210\0\1\BrdDat\testBoard.dat
    
    -----[Print the reset-command software log-file]-----------------------------
    
    This utility has selected a 560/2xx-class product.
    This utility will load the program 'xds2xxu.out'.
    The library build date was 'Sep 20 2022'.
    The library build time was '17:17:24'.
    The library package version is '9.9.0.00040'.
    The library component version is '35.35.0.0'.
    The controller does not use a programmable FPGA.
    The controller has a version number of '13' (0x0000000d).
    The controller has an insertion length of '0' (0x00000000).
    This utility will attempt to reset the controller.
    This utility has successfully reset the controller.
    
    -----[Print the reset-command hardware log-file]-----------------------------
    
    This emulator does not create a reset log-file.
    
    -----[An error has occurred and this utility has aborted]--------------------
    
    This error is generated by TI's USCIF driver or utilities.
    
    The value is '-180' (0xffffff4c).
    The title is 'SC_ERR_CTL_NO_TRG_POWER'.
    
    The explanation is:
    The controller has detected a target power loss.
    The user must turn-on or connect the power supply for the target.
    
    [End: Texas Instruments XDS2xx USB Debug Probe_0]